# Navigation Part of the Backpacking Merit Badge Digital Resource Guide: [Introduction & Overview](https://merit-badge.university/merit-badges/backpacking/guide/index.md) > **6.** Do the following: This requirement covers three navigation skills every backpacker must master: - **Reading topographic maps** — understanding the landscape before you see it - **Using a map and compass or GPS** — establishing your position on the ground - **Staying found** — and what to do if you get lost ### Requirement 6a: Reading Topographic Maps > **6a.** Demonstrate that you can read topographic maps. A **topographic map** (or "topo map") uses contour lines to show the three-dimensional shape of the land on a flat piece of paper. Unlike a road map that just shows streets, a topo map reveals ridges, valleys, cliffs, lakes, and streams — everything you need to plan a route through the backcountry. ### Key Features of a Topo Map - **Contour lines**: Brown lines that connect points of equal elevation. Every point along a single contour line is at the same height above sea level. - **Contour interval**: The elevation difference between adjacent contour lines, printed in the map legend (commonly 40 feet on USGS maps). Closer lines mean steeper terrain; widely spaced lines mean gentle slopes. - **Index contours**: Every fifth contour line is drawn thicker and labeled with its elevation. These help you quickly read elevation. - **Scale**: Tells you the ratio between map distance and real-world distance. A 1:24,000 scale (the standard USGS "7.5-minute" map) means 1 inch on the map equals 24,000 inches (2,000 feet) on the ground. - **Legend/key**: Explains all symbols — trails, roads, buildings, water features, vegetation, and more. - **Declination diagram**: Shows the difference between magnetic north (where your compass points) and true north (where the map grid points). You must adjust for this difference when navigating. ### Reading the Terrain With practice, you can "see" the landscape by looking at contour lines: - **Close together** = steep slope (cliff if they merge) - **Far apart** = gentle slope or flat ground - **V-shapes pointing uphill** = valley or stream drainage - **V-shapes pointing downhill** = ridge or spur - **Closed circles** = hilltop or summit - **Concentric closed circles with tick marks** = depression ![A section of a topographic map with labeled callouts pointing to contour lines, a summit, a valley, a ridge, a stream, a trail, and the contour interval in the legend](https://ik.imagekit.io/doulacoop/tr:w-800/mbu-assets/merit-badges/backpacking/guide/topo-map-features?v=a78c12aa) > **Tip** > > Practice reading topo maps at home before your trek. Print out the map for a local park or trail you know well and compare the contour lines to the terrain you have already walked. The features will click much faster when you can match map to memory. ### Requirement 6b: Establishing Your Position > **6b.** While on a trek, use a map and compass to establish your position on the ground at three different locations, OR use a GPS receiver to establish your position on a topographic map and on the ground at three different locations. Knowing where you are on the map at any given moment is the core skill of backcountry navigation. Here are two methods: ### Method 1: Map and Compass (Triangulation) 1. **Orient your map**: Place the compass on the map and rotate the map until the compass needle aligns with the map's north arrow (adjusting for declination). 2. **Identify two or three landmarks** you can see — a prominent peak, a lake, a trail junction. 3. **Take a bearing** to each landmark with your compass. 4. **Draw lines** (or imagine them) on the map from each landmark along the reverse bearing. 5. **Where the lines intersect** is your approximate position. ### Method 2: GPS Receiver 1. Turn on your GPS device and wait for it to acquire satellite signals. 2. Read your coordinates (latitude/longitude or UTM grid reference). 3. Plot those coordinates on your topo map using the grid lines printed on the map. > **Did You Know?** > > GPS satellites orbit about 12,550 miles above Earth and your GPS receiver communicates with at least four of them simultaneously to calculate your position. Despite that incredible technology, a GPS is only as useful as the batteries powering it — which is why you should always carry a map and compass as backup. ### Requirement 6c: Staying Found > **6c.** Explain how to stay found, and what to do if you get lost. The best navigation strategy is to never get lost in the first place. Experienced backpackers call this **"staying found"** — constantly keeping track of where you are so you never reach a point of confusion. ### How to Stay Found - **Check your map frequently.** Every 15–20 minutes, compare what you see around you to what the map shows. Look for landmarks — ridgelines, stream crossings, trail junctions. - **Track your pace.** Know roughly how fast you travel (a common hiking pace is 2 miles per hour on flat terrain, slower uphill). Use your watch and speed to estimate how far you have gone. - **Note landmarks as you pass them.** Make a mental (or written) note of distinctive features: "Crossed a wooden bridge at 10:15 AM" or "Passed the Y-junction where the trail splits left toward the lake." - **Look back.** Periodically turn around and observe the trail from the opposite direction. If you need to retrace your steps, the trail looks completely different going the other way. - **Keep your crew together.** Everyone should be within sight or shouting distance of the person ahead and behind them. ### What to Do If You Get Lost If you realize you do not know where you are, use the **STOP** method: > **Be Prepared! Lost on the Trail — The STOP Method** > > - **S — Stop.** Do not keep walking. Sit down, drink some water, and collect yourself. Panicking and pressing forward without a plan usually makes things worse. > - **T — Think.** When did you last know where you were? What landmarks have you passed since then? Can you hear a road, stream, or other hikers? > - **O — Observe.** Look around for trail markers, blazes, cairns, or boot prints. Check your map and compass. Try to match terrain features to the map. > - **P — Plan.** If you can confidently retrace your steps to the last known point, do so carefully. If not, stay where you are and signal for help. Use your whistle (three blasts is the universal distress signal), bright clothing, or a signal mirror. > **Safety First!** > > If you are truly lost and cannot find your way, staying put is almost always safer than wandering. Search and rescue teams look for you based on your trip plan and last known location. The farther you wander from that area, the harder you are to find. ![A Scout holding a compass over a topographic map spread on a rock, with mountain terrain visible in the background](https://ik.imagekit.io/doulacoop/tr:w-800/mbu-assets/merit-badges/backpacking/guide/compass-map-navigation?v=eec27fc8) ### Video Resources Video: [How to Read a Topographic Map](https://youtu.be/CoVcRxza8nI?si=_vx1M7g51M2l_j4a) Video: [How to Use a Compass](https://youtu.be/0cF0ovA3FtY?si=o6nQlPuwNkbBJhwu) Video: [What to Do If You Get Lost](https://youtu.be/dq6fq-XdgUk?si=jzJ2anuQ7AwWrb3c) [USGS — How to Read a Topographic Map](https://www.usgs.gov/programs/national-geospatial-program/topographic-maps): The USGS guide to understanding topographic maps, including free downloadable maps for any area in the United States. --- - Previous: [Water Treatment & Hydration](https://merit-badge.university/merit-badges/backpacking/guide/req5/index.md) - Next: [Weather Preparedness](https://merit-badge.university/merit-badges/backpacking/guide/req7/index.md)