Req 2a3 — Parts of Ice Skates

There are three main types of ice skates — figure skates, hockey skates, and speed skates — and each is engineered for a specific purpose. Understanding the parts of each type will help you choose the right skate and discuss them confidently with your counselor.

Parts Common to All Ice Skates

Figure Skates

Figure skates are designed for jumps, spins, and precise edge work. The boot is high-cut and stiff for ankle support. The blade has a distinctive toe pick — a serrated section at the front used to launch jumps. The blade has a slight curve called the rocker that lets skaters balance on the front, middle, or back of the blade for different moves. Two edges — the inside edge and the outside edge — are separated by a hollow ground into the bottom of the blade.

Hockey Skates

Hockey skates prioritize speed, lateral mobility, and durability. The boot is lower-cut than a figure skate to allow ankle flexion for quick direction changes, and is reinforced with hard materials to protect against puck and stick impacts. The blade is flatter (less rocker) and shorter relative to foot length, which helps with explosive acceleration and fast stops. Hockey skates have no toe pick.

Speed Skates

Speed skates maximize gliding efficiency. The boot is very low-cut to allow full ankle range of motion. The blade is long — often extending beyond both the toe and heel of the boot — and nearly flat. Speed skates have no toe pick. Two types exist: short-track skates (for 111-meter indoor ovals) and long-track skates (for 400-meter ovals), with the long-track version sometimes using a clap-skate mechanism that hinges at the toe to increase push-off power.

Official Resources