Req 2c — In-Line Skating Overview

Option C covers in-line skating — three to five wheels arranged in a single row, creating a profile similar to an ice blade. Work through all 16 subrequirements with your counselor. The skills build progressively, so complete them in sequence.

What You’ll Complete

• Req 2c1 — In-Line Safety & Courtesy: Explain safety rules and courtesy guidelines for in-line skating.
• Req 2c2 — Parts of In-Line Skates: Describe the components of an in-line skate and what each part does.
• Req 2c3 — Required Safety Gear: Describe required and recommended protective equipment for in-line skating.
• Req 2c4 — In-Line Skate Care: Explain four essential steps to good in-line skate care.
• Req 2c5 — Forward Skating: Skate forward with smooth, linked strokes for at least 100 feet.
• Req 2c6 — One-Foot Glide: Skate forward and glide at least 15 feet on each foot separately.
• Req 2c7 — Heel Brake Stop: Stop on command on flat pavement using the heel brake.
• Req 2c8 — Forward Crossover: Perform a forward crossover.
• Req 2c9 — Forward Swizzles: Perform a series of forward, linked swizzles for at least 40 feet.
• Req 2c10 — Backward Swizzles: Skate backward for at least 40 feet in a series of linked backward swizzles.
• Req 2c11 — Lunge Turn: From a strong pace, perform a lunge turn around an object.
• Req 2c12 — Mohawk: Perform a mohawk.
• Req 2c13 — One-Foot Downhill Slalom: Perform a series of at least four one-footed downhill slaloms on a gentle slope.
• Req 2c14 — Passing from Behind: Describe how to pass a pedestrian or another skater from behind.
• Req 2c15 — Avoiding Obstacles: Describe at least three ways to avoid an unforeseen obstacle while skating.
• Req 2c16 — Curb Techniques: Describe two ways to get on and off a curb and demonstrate at least one.

Before You Begin

You will need access to smooth, flat outdoor pavement or a paved path for most of these requirements. Some (like 2c13) require a gentle hill with a safe run-out at the bottom. Make sure your in-line skates fit properly — the heel should be snug with minimal movement inside the boot. Inspect wheels for wear and bearings for smooth rolling before any session.